Hydrochloric acid, ROTIPURAN®Supra 35 %
Bs. 0.00Bs. 0.00
Hydrochloric acid
HCl, Hydrogen chloride
Empirical formula HCl
Molar mass (M) 36,46 g/mol
Density (D) 1,18 g/cm³
Melting point (mp) -26 °C
ADR 8 II
WGK 1
CAS No. 7647-01-0
EG-Nr. 231-595-7
UN-Nr. 1789
Highpure acid (ppb quality) for sample preparation in trace analysis (e.g. using ICP, AAS, Ion chromatography etc.).
 |
Examples of effect: Damage metals and burn body tissues; may cause serious eye damage. Safety: Avoid contact; wear safety spectacles and gloves. In the event of contact with eyes and skin, rinse with water. |
 |
Examples of effect: Lead to damage to heath, cause irritation to eyes, skin or respiratory organs. Are fatal in larger quantities. Safety: As previously stated, in the event of skin irritation or contact with eyes, rinse with water or a suitable medium. |
| H290-H314-H335 | may be corrosive to metals, causes severe skin burns and eye damage, may cause respiratory irritation. |
| P280 P303+P361+P353 P304+P340 P305+P351+P338 P310 | wear protective gloves/protective clothing/eye protection/face protection, IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water [or shower], IF INHALED: Remove person to fresh air and keep comfortable for breathing, IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing, immediately call a POISON CENTER/doctor. |
Description
Hydrochloric acid
Acids, Alkaline Solutions and Water for trace analysis via ICP-OES, ICP-MS, AAS and IC
Carl ROTH provides two high quality product lines, ROTIPURAN® Ultra & Supra specially for research, trace analysis and electronics. These ultrapure reagents are produced using a technologically complex distillation process (subboiling distillation) and are filled only into specially selected, suitable containers under clean room conditions. Very extensive production and quality controls guarantee extremely high quality.
This supra quality line (ppb-quality) is perfectly suitable for sample preparation in trace analysis (e.g. via ICP-OES, AAS, IC, etc.). Over 60 elements are specified and their content is below 1 ppb [parts per billion =10-9]. Bottled and delivered in special plastic bottles. The certificates of analysis are available online.
