OmniaLab DS

Bs. 0.00Bs. 0.00

The safe one for large amounts of pure water.
For H2O pure CLRW (CLSI) + DIN EN 285 + EN ISO 15883.

If safety is paramount and the quality of the cleaning already determines the quality of the results, then the OmniaLabDS system is the perfect solution.

Even for large pure water volumes up to 60 l, the OmniaLabDS guarantees compliance with international water standards in laboratories and medical technology. The combination with regenerative polisher cartridges and an optional emergency supply makes the system predestined for the reliable supply of clinical analyzers. For the supply of steam sterilizers as well as for cleaning and disinfecting devices.

  • OptiFill dispenser with LCD display as standard
    • Tank volume display in percent
  • 100 l tank with recirculation and pressure outlet
  • Tank volume modularly expandable
  • spent filters are simply and quickly exchanged
  • Leakage sensor as standard
  • optionally with emergency supply module
  • optionally with degassing unit

OmniaLabDS 20 OmniaLabDS 40 OmniaLabDS 60
Pure water Typ II + CLRW (CLSI)
DIN EN 285 + ISO EN 15883
Pure water performance at 15 °C [l/h] 20 40 60
Conductivity at 25 °C [µS/cm] 0.1 up to 1 0.1 up to 1 0.1 up to 1
Resistance at 25 °C [MΩ x cm] 10 up to 1 10 up to 1 10 up to 1
Dispensing performance dispenser [l/min.] up to 2 up to 2 up to 2
Particles* > 0.2 µm [1/ml] < 1 < 1 < 1
Bacteria* [KBE/ml] < 0.1 < 0.1 < 0.1
Pure water tank pressurized outlet optional optional optional

OmniaLabDS 20 OmniaLabDS 40 OmniaLabDS 60
Softened or hardness-stabilized water according to DIN 2000
Feedwater temperature [°C] + 2 up to 35 + 2 up to 35 + 2 up to 35
Manganese and iron content [mg/l] < 0.05 < 0.05 < 0.05
Free chlorine content [mg/l] < 0.1 < 0.1 < 0.1
Silt density index (SDI) max. 3 max. 3 max. 3

OmniaLabDS 20 OmniaLabDS 40 OmniaLabDS 60
Connector size R3/4″ R3/4″ R3/4″
Operating pressure [bar] 2 up to 6 2 up to 6 2 up to 6
Supply voltage [Volt/Hz] 90-240/50-60 90-240/50-60 90-240/50-60
Connected load [kW] 0.1 0.1 0.1
Ambient temperature [°C] + 2 up to 35 + 2 up to 35 + 2 up to 35
Dimensions tower* [W x H x D mm] 511 x 1520 x 575 511 x 1520 x 575 511 x 1520 x 575
Dimensions base cabinet tank [W x H x D mm] 511 x 800 x 575 511 x 800 x 575 511 x 800 x 575
Weight (without polishing cartridge) [kg] 39 39 40
* with OptiFill Dispenser

Article no. System type* Typical applications
18800020 OmniaLabDS 20 Feedwater for analyzers, autoclaves and laboratory washers
18800040 OmniaLabDS 40 Feedwater for analyzers, autoclaves and laboratory washers
18800060 OmniaLabDS 60 Feedwater for analyzers, autoclaves and laboratory washers
* RO cartridge, stainless steel polishing cartridge, sterile filter capsule 0.2 μm, sterile overflow and sterile vent filter + CO2 absorber included

Accessories
19200020 Pre-treatment unit OmniaLab – 10“
19200050 UV tank disinfection unit 254 nm
19200051 UV Flow through disinfection 254 nm
12280050 Replacement/second polishing cartridge type DS 2800 RV
19200040 Emergency supplyl
19200041 Degassing unit
16561201 External pressure booster pump SC 3000

Description

The safe one for large amounts of pure water.
For H2O pure CLRW (CLSI) + DIN EN 285 + EN ISO 15883.

If safety is paramount and the quality of the cleaning already determines the quality of the results, then the OmniaLabDS system is the perfect solution.

Even for large pure water volumes up to 60 l, the OmniaLabDS guarantees compliance with international water standards in laboratories and medical technology. The combination with regenerative polisher cartridges and an optional emergency supply makes the system predestined for the reliable supply of clinical analyzers. For the supply of steam sterilizers as well as for cleaning and disinfecting devices.