OmniaLab RO
Bs. 0.00Bs. 0.00
The powerful for constantly large quantities of pure water.
For H2O pure type III.
If there is a need for constantly large quantities of reverse osmosis water in the laboratory, the OmniaLabRO is used. The system meets the international water standard type III.
In addition, the OmniaLabRO system holds 100 liters of reverse osmosis water in a storage tank ready for withdrawal. This system is used to supply autoclaves, laboratory dishwashers, humidifiers, and ultrapure water systems.
- OptiFill dispenser as standard
- Tank volume display in percent
- with 100 l pure water tank
- Tank volume modularly expandable
- Leakage sensor is standard
- One-handed operation
- Convenient water withdrawal
- Flexible on the work surface
- Tank space-saving under the work surface
| OmniaLabRO 20 | OmniaLabRO 40 | OmniaLabRO 60 | |
|---|---|---|---|
| Reverse osmosis water type III | |||
| Pure water performance at 15 °C [l/h] | 20 | 40 | 60 |
| RO membrane retention rate for ions, germs and bacteria [%] | > 98 | > 98 | > 98 |
| OmniaLabRO 20 | OmniaLabRO 40 | OmniaLabRO 60 | |
|---|---|---|---|
| Softened or hardness-stabilized water according to DIN 2000 | |||
| Feedwater temperature [°C] | + 2 up to 35 | + 2 up to 35 | + 2 up to 35 |
| Manganese and iron content [mg/l] | < 0.05 | < 0.05 | < 0.05 |
| Free chlorine content [mg/l] | < 0.1 | < 0.1 | < 0.1 |
| Silt density index (SDI) | max. 3 | max. 3 | max. 3 |
| OmniaLabRO 20 | OmniaLabRO 40 | OmniaLabRO 60 | |
|---|---|---|---|
| Connector size | R3/4″ | R3/4″ | R3/4″ |
| Operating pressure [bar] | 2 up to 6 | 2 up to 6 | 2 up to 6 |
| Supply voltage [Volt/Hz] | 90-240/50-60 | 90-240/50-60 | 90-240/50-60 |
| Connected load [kW] | 0.1 | 0.1 | 0.1 |
| Ambient temperature [°C] | + 2 up to 35 | + 2 up to 35 | + 2 up to 35 |
| Dimensions tower* [W x H x D mm] | 511 x 1520 x 575 | 511 x 1520 x 575 | 511 x 1520 x 575 |
| Dimensions base cabinet tank [W x H x D mm] | 511 x 800 x 575 | 511 x 800 x 575 | 511 x 800 x 575 |
| Weight [kg] | 38 | 38 | 40 |
| * with OptiFill Dispenser | |||
| Article no. | System type* | Typical applications |
|---|---|---|
| 18500020 | OmniaLabRO 20 | Feedwater for autoclaves and laboratory washers, ultrapure water systems and air humidifiers |
| 18500040 | OmniaLabRO 40 | Feedwater for autoclaves and laboratory washers, ultrapure water systems and air humidifiers |
| 18500060 | OmniaLabRO 60 | Feedwater for autoclaves and laboratory washers, ultrapure water systems and air humidifiers |
| Accessories | |
|---|---|
| 19200020 | Pre-treatment unit OmniaLab – 10“ |
| 19200050 | UV tank disinfection unit 254 nm |
| 16561201 | External pressure booster pump SC 3000 |
Description
The powerful for constantly large quantities of pure water.
For H2O pure type III.
If there is a need for constantly large quantities of reverse osmosis water in the laboratory, the OmniaLabRO is used. The system meets the international water standard type III.
In addition, the OmniaLabRO system holds 100 liters of reverse osmosis water in a storage tank ready for withdrawal. This system is used to supply autoclaves, laboratory dishwashers, humidifiers, and ultrapure water systems.
