OmniaTap

Bs. 0.00Bs. 0.00

The powerful all-rounder.
For H2O pure type I + II.

OmniaTap is the all-rounder with integrated reverse osmosis incl. circulation tank for type II pure water and cost-effective ultrapure water generation type I.

The combination of state-of-the-art treatment techniques enables the extraction of pure and ultrapure water from just one system. It can be connected directly to a drinking water pipe.

The flexible dispenser is used to extract category I ultrapure water. The removal takes place at the push of a button via the digital control of the dispenser.

The optional storage tank (10, 30 or 60 litres) with recirculation keeps the quality permanently at type II. Downstream terminals can be supplied via an optional pressure output on the pure water tank.

  • OptiFill dispenser with LCD display as standard
    • Tank volume display in percent
  • spent filters are simply and quickly exchanged
  • Leakage sensor as standard
  • Storage tank with recirculation
  • TapWater-Set – direct drinking water connection
  • ready-to-use, ready for connection incl. filter inserts

OmniaTap OmniaTap UV OmniaTap UV/UF
Pure water values type II
Pure water performance at 15 °C [l/h] 12 / 20 12 / 20 12 / 20
Conductivity at 25 °C [µS/cm] 0.067 up to 0.1 0.067 up to 0.1 0.067 up to 0.1
Resistance at 25 °C [MΩ x cm] 15 up to 10 15 up to 10 15 up to 10
Pure water tank pressurized outlet optional optional optional
Ultra pure water values type I
Conductivity at 25 °C [µS/cm] 0.055 0.055 0.055
Resistance at 25 °C [MΩ x cm] 18.2 18.2 18.2
TOC-value* [ppb] 1 up to 5 1 up to 5 1 up to 5
Dispensing performance [l/min.] up to 2 up to 2 up to 1.6
Endotoxins* [EU/ml] < 0.001 < 0.001 < 0.001
Particles** > 0,2 µm [1/ml] < 1 < 1 < 1
Bacteria** [KBE/ml] < 0.01 < 0.01 < 0.01
* in dependence on the feedwater quality ** with sterilizing filter 0.2 μm

OmniaTap OmniaTap UV OmniaTap UV/UF
Tap water according to DIN 2000
Feedwater temperature [°C] + 2 up to 35 + 2 up to 35 + 2 up to 35
Manganese and iron content [mg/l] < 0.05 < 0.05 < 0.05
Free chlorine content [mg/l] < 0.1 < 0.1 < 0.1
Silt density index (SDI) max. 3 max. 3 max. 3

OmniaTap OmniaTap UV OmniaTap UV/UF
Connector size R3/4″ R3/4″ R3/4″
Supply voltage [Volt/Hz] 90-240/50-60 90-240/50-60 90-240/50-60
Connected load [kW] 0.1 0.1 0.1
Ambient temperature [°C] + 2 up to 35 + 2 up to 35 + 2 up to 35
Dimensions* [W x H x D mm] 390 x 720 x 615 390 x 720 x 615 390 x 720 x 615
Weight [kg] 20 21 21
* with OptiFill Dispenser

Article no. System type* Typical applications
18200101 OmniaTap 12 AAS, IC, ICP, buffers and media preparation
18200201 OmniaTap 20 AAS, IC, ICP, buffers and media preparation
18200102 OmniaTap 12 UV Ultra-trace analysis, ICP-MS, HPLC, TOC
18200202 OmniaTap 20 UV Ultra-trace analysis, ICP-MS, HPLC, TOC
18200103 OmniaTap 12 UV/UF Life science and microbiology, cell culture media
18200203 OmniaTap 20 UV/UF Life science and microbiology, cell culture media
* RO cartridge, ultrapure water cartridge, sterile filter capsule 0.2 μm, sterile overflow and sterile vent filter included
Accessories
19200300 Wall mount Omnia
19200056 Disinfection kit Omnia
19200057 Disinfectant Omnia – 3 pcs./pack
19200021 Pre-treatment unit OmniaTap –10“

Description

The powerful all-rounder.
For H2O pure type I + II.

OmniaTap is the all-rounder with integrated reverse osmosis incl. circulation tank for type II pure water and cost-effective ultrapure water generation type I.

The combination of state-of-the-art treatment techniques enables the extraction of pure and ultrapure water from just one system. It can be connected directly to a drinking water pipe. The flexible dispenser is used to extract category I ultrapure water. The removal takes place at the push of a button via the digital control of the dispenser.

The optional storage tank (10, 30 or 60 litres) with recirculation keeps the quality permanently at type II. Downstream terminals can be supplied via an optional pressure output on the pure water tank.