OmniaTap xs basic
Bs. 0.00Bs. 0.00
The practical all-rounder.
For H2O pure type I + II.
OmniaTap xsbasic is the practical compact system with OneHand dispenser when both pure and ultrapure water is required in small quantities.
The combination of state-of-the-art treatment techniques enables the extraction of pure and ultrapure water from just one system. It can be connected directly to a drinking water pipe. The flexible dispenser is used to extract category I ultrapure water. The removal takes place at the push of a button via the digital control of the dispenser.
An integrated 7 litre tank with recirculation keeps the quality permanently at type II. Downstream terminals can be supplied via an optional pressure output on the pure water tank.
- very space saving, fits on an A4 paper
- OptiFill dispenser with LCD display as standard
- spent filters are simply and quickly exchanged
- Leakage sensor as standard
- Storage tank with recirculation
- ready-to-use, ready for connection incl. filter inserts
- One-handed operation
- Convenient water withdrawal
- Space-saving on the wall
| OmniaTap xsbasic 5 | OmniaTap xsbasic 5 UV | |
|---|---|---|
| Pure water values type II | ||
| Pure water performance at 15 °C [l/h] | 5 | 5 |
| Conductivity at 25 °C [µS/cm] | 0.067 up to 0.1 | 0.067 up to 0.1 |
| Resistance at 25 °C [MΩ x cm] | 15 up to 10 | 15 up to 10 |
| Ultrapure water values type I | ||
| Conductivity at 25 °C [µS/cm] | 0.055 | 0.055 |
| Resistance at 25 °C [MΩ x cm] | 18.2 | 18.2 |
| TOC-value* [ppb] | < 10 | < 5 |
| Dispensing performance [l/min.] | up to 2 | up to 2 |
| Dispensing preset volumes | optional | optional |
| Particles** > 0.2 µm [1/ml] | < 1 | < 1 |
| Bacteria** [KBE/ml] | < 0.01 | < 0.01 |
| * The values given are typical and may vary depending on the quality of the feed water | ** With sterile filter capsule 0.2 μm | |
| OmniaTap xsbasic 5 | OmniaTap xsbasic 5 UV | |
|---|---|---|
| Tap water according to DIN 2000 | ||
| Feedwater pressure [bar] | 0.5 up to 6 | 0.5 up to 6 |
| Feedwater temperature [°C] | + 2 up to 35 | + 2 up to 35 |
| Conductivity at 25 °C [µS/cm] | < 2000 | < 2000 |
| Colloid index (SDI) | < 10 | < 10 |
| Dissolved CO2 [ppm] | < 30 | < 30 |
| Free chlorine [ppm] | < 3 | < 3 |
| TOC-value [ppb] | < 50 | < 50 |
| Hardness* [as CaCO3] | < 300 | < 300 |
| Silica [ppm] | < 30 | < 30 |
| pH range | 4 up to 10 | 4 up to 10 |
| * For higher values, pre-treatment must be carried out upstream | ||
| OmniaTap xsbasic 5 | OmniaTap xsbasic 5 UV | |
|---|---|---|
| Feedwater connection | R3/4″ | R3/4″ |
| Electrical connection [Volt/Hz] | 90-240/50-60 | 90-240/50-60 |
| Connected load [W] | 120 | 120 |
| Ambient temperature [°C] | + 2 up to 35 | + 2 up to 35 |
| Dimensions [W x H x D mm] | 253 x 530 x 520 | 253 x 530 x 520 |
| Weight dry [kg] | 19 | 19 |
| The device can be installed either on a bench or on a wall. | ||
| Article no. | System type* | Typical applications |
|---|---|---|
| 18110051 | OmniaTap xs basic 5 | AAS, IC, ICP, buffers and media preparation |
| 18110052 | OmniaTap xs basic 5 UV | Ultra-trace analysis, ICP-MS, HPLC, TOC-analysis |
| * RO cartridge, ultrapure water cartridge, sterile filter capsule 0.2 μm, sterile overflow and sterile vent filter included | ||
| Accessories | |
|---|---|
| 19200305 | Wall mount Omnia xs |
| 19200500 | Volume dosing Omnia xs |
| 19200090 | Disinfection cartridge Omnia xs |
| 19200057 | Disinfectant Omnia – 3 pcs. / pack |
| 19200091 | Disinfection kit Omnia xs complete |
| 19200021 | Pre-treatment unit OmniaTap – 10″ |
Description
The practical all-rounder.
For H2O pure type I + II.
OmniaTap xsbasic is the practical compact system with OneHand dispenser when both pure and ultrapure water is required in small quantities.
The combination of state-of-the-art treatment techniques enables the extraction of pure and ultrapure water from just one system. It can be connected directly to a drinking water pipe. The flexible dispenser is used to extract category I ultrapure water. The removal takes place at the push of a button via the digital control of the dispenser.
An integrated 7 litre tank with recirculation keeps the quality permanently at type II. Downstream terminals can be supplied via an optional pressure output on the pure water tank.
