Rapid Heating Chamber Furnace – RWF
Bs. 0.00Bs. 0.00
Rapid Heating Chamber Furnace – RWF
Please note
– Heat up rate is measured to 100°C below max, using an empty chamber
– Holding power is measured at continuous operating temperature
– Maximum power and heat up times based on a 240V supply
– The uniform volume is smaller than the total chamber volume
Options (specify these at time of order)
- A range of sophisticated digital controllers, multisegment programmers and data loggers with digital communication options is available – more information about controllers
- Over-temperature protection (recommended to protect valuable contents & for unattended operation)
RWF 11/5
| Max temp (°C) | 1100 |
| Max continuous operating temp (°C) | 1000 |
| Volume (litres) | 5 |
| Heat-up time (mins) | 10 |
| Dimensions: Internal H x W x D (mm) |
130 x 160 x 250 |
| Dimensions: External H x W x D (mm) |
585 x 375 x 485 |
| Dimensions: External with door open H x W x D (mm) |
800 x 375 x 485 |
| Max power (W) | 2750 |
| Holding power (W) | 680 |
| Thermocouple type | K |
| Weight (kg) | 28 |
RWF 11/13
| Max temp (°C) | 1100 |
| Max continuous operating temp (°C) | 1000 |
| Volume (litres) | 13 |
| Heat-up time (mins) | 11 |
| Dimensions: Internal H x W x D (mm) |
195 x 210 x 325 |
| Dimensions: External H x W x D (mm) |
655 x 435 x 610 |
| Dimensions: External with door open H x W x D (mm) |
905 x 435 x 610 |
| Max power (W) | 5000 |
| Holding power (W) | 1200 |
| Thermocouple type | K |
| Weight (kg) | 45 |
RWF 11/23
| Max temp (°C) | 1100 |
| Max continuous operating temp (°C) | 1000 |
| Volume (litres) | 23 |
| Heat-up time (mins) | 13 |
| Dimensions: Internal H x W x D (mm) |
220 x 260 x 400 |
| Dimensions: External H x W x D (mm) |
705 x 505 x 675 |
| Dimensions: External with door open H x W x D (mm) |
990 x 505 x 675 |
| Max power (W) | 9100 |
| Holding power (W) | 1800 |
| Thermocouple type | K |
| Weight (kg) | 65 |
RWF 12/5
| Max temp (°C) | 1200 |
| Max continuous operating temp (°C) | 1100 |
| Volume (litres) | 5 |
| Heat-up time (mins) | 12 |
| Dimensions: Internal H x W x D (mm) |
130 x 160 x 250 |
| Dimensions: External H x W x D (mm) |
585 x 375 x 485 |
| Dimensions: External with door open H x W x D (mm) |
800 x 375 x 485 |
| Max power (W) | 2750 |
| Holding power (W) | 820 |
| Thermocouple type | R |
| Weight (kg) | 28 |
RWF 12/13
| Max temp (°C) | 1200 |
| Max continuous operating temp (°C) | 1100 |
| Volume (litres) | 13 |
| Heat-up time (mins) | 13 |
| Dimensions: Internal H x W x D (mm) |
195 x 210 x 325 |
| Dimensions: External H x W x D (mm) |
655 x 435 x 610 |
| Dimensions: External with door open H x W x D (mm) |
905 x 435 x 610 |
| Max power (W) | 5000 |
| Holding power (W) | 1450 |
| Thermocouple type | R |
| Weight (kg) | 45 |
RWF 12/23
| Max temp (°C) | 1200 |
| Max continuous operating temp (°C) | 1100 |
| Volume (litres) | 23 |
| Heat-up time (mins) | 15 |
| Dimensions: Internal H x W x D (mm) |
220 x 260 x 400 |
| Dimensions: External H x W x D (mm) |
705 x 505 x 675 |
| Dimensions: External with door open H x W x D (mm) |
990 x 505 x 675 |
| Max power (W) | 9100 |
| Holding power (W) | 2100 |
| Thermocouple type | R |
| Weight (kg) | 65 |
Description
Rapid Heating Chamber Furnace – RWF
The RWF rapid wire chamber furnaces are available in three chamber sizes with maximum operating temperatures of 1100 °C or 1200 °C. The free radiating wire elements in combination with low thermal mass insulation are designed to provide rapid thermal response within the chamber.
Standard features
- 1100°C or 1200°C maximum operating temperature
- 5, 13 or 23 litre chamber volumes
- Ambient to 1000°C in as little as 10 minutes
- Rapid thermal response from free radiating coiled wire elements
- Low thermal mass insulation for high energy efficiency
- Soft closing, vertical lift door keeps heated surface away from the user
- Carbolite Gero 301 controller, with single ramp to set-point & process timer
- Soft closing parallel action door keeps heated surface away from the user
- Hard wearing hearth
