OmniaTap II

Bs. 0.00Bs. 0.00

The compact for pure water.
For H2O pure type II.

OmniaTap II is the compact system with integrated reverse osmosis and deionization for type II pure water. It can be connected directly to a drinking water pipe. The flexible dispenser allows a very practical withdrawal of water at the push of a button via the digital control of the dispenser. The removal takes place at the push of a button via the digital control of the dispenser.

The available choice of storage tanks (10, 30 or 60 liters) with recirculation keeps the quality permanently at a high level. An optional pressure output on the pure water tank can also be used to supply downstream end devices.

  • OptiFill dispenser with LCD display as standard
    • Tank volume display in percent
  • TapWater-Set – direct drinking water connection
  • simple and economical filter change
  • Leakage sensor as standard
  • Storage tanks (optionally 30 or 60 litres) as standard with sterile tank overflow and ventilation filter 0.2 μm
  • ready-to-use, ready for connection incl. filter inserts
OmniaTap II OmniaTap II UV
Pure water type II
Pure water performance at 15 °C [l/h] 12 / 20 12 / 20
Conductivity at 25 °C [µS/cm] 0.067 up to 0.1 0.067 up to 0.1
Resistance at 25 °C [MΩ x cm] 15 up to 10 15 up to 10
Pure water tank pressurized outlet optional optional

OmniaTap II OmniaTap II UV
Tap water according to DIN 2000
Feedwater temperature [°C] + 2 up to 35 + 2 up to 35
Manganese and iron content [mg/l] < 0.05 < 0.05
Free chlorine content [mg/l] < 0.1 < 0.1
Silt density index (SDI) max. 3 max. 3

OmniaTap II OmniaTap II UV
Connector size R3/4″ R3/4″
Operating pressure [bar] 2 up to 6 2 up to 6
Supply voltage [Volt/Hz] 90-240/50-60 90-240/50-60
Connected load [kW] 0.1 0.1
Ambient temperature [°C] + 2 up to 35 + 2 up to 35
Dimensions* [W x H x D mm] 390 x 720 x 615 390 x 720 x 615
Weight [kg] 20 21
* with OptiFill Dispenser

Article no. System type* Typical applications
18200212 OmniaTap 12 AAS, buffers and media preparation
18200220 OmniaTap 20 AAS, buffers and media preparation
18200213 OmniaTap 12 UV AAS, buffers and media preparation
18200221 OmniaTap 20 UV AAS, buffers and media preparation
* RO cartridge, pure water cartridge and sterile filter capsule 0.2 μm included
Accessories
19200300 Wall mount Omnia
19200056 Disinfection kit Omnia
19200057 Disinfectant Omnia – 3 pcs./pack
19200021 Pre-treatment unit OmniaTap –10“
19200050 UV tank disinfection unit 254 nm
16500030 Pure water tank 30 litres
16500060 Pure water tank 60 litres
16561201 External pressure booster pump SC 3000

Description

The compact for pure water.
For H2O pure type II.

OmniaTap II is the compact system with integrated reverse osmosis and deionization for type II pure water. It can be connected directly to a drinking water pipe. The flexible dispenser allows a very practical withdrawal of water at the push of a button via the digital control of the dispenser. The removal takes place at the push of a button via the digital control of the dispenser.

The available choice of storage tanks (10, 30 or 60 liters) with recirculation keeps the quality permanently at a high level. An optional pressure output on the pure water tank can also be used to supply downstream end devices.