OmniaTap xs basic

Bs. 0.00Bs. 0.00

The practical all-rounder.
For H2O pure type I + II.

OmniaTap xsbasic is the practical compact system with OneHand dispenser when both pure and ultrapure water is required in small quantities.

The combination of state-of-the-art treatment techniques enables the extraction of pure and ultrapure water from just one system. It can be connected directly to a drinking water pipe. The flexible dispenser is used to extract category I ultrapure water. The removal takes place at the push of a button via the digital control of the dispenser.

An integrated 7 litre tank with recirculation keeps the quality permanently at type II. Downstream terminals can be supplied via an optional pressure output on the pure water tank.

  • very space saving, fits on an A4 paper
  • OptiFill dispenser with LCD display as standard
  • spent filters are simply and quickly exchanged
  • Leakage sensor as standard
  • Storage tank with recirculation
  • ready-to-use, ready for connection incl. filter inserts

OmniaTap xsbasic 5 OmniaTap xsbasic 5 UV
Pure water values type II
Pure water performance at 15 °C [l/h] 5 5
Conductivity at 25 °C [µS/cm] 0.067 up to 0.1 0.067 up to 0.1
Resistance at 25 °C [MΩ x cm] 15 up to 10 15 up to 10
Ultrapure water values type I
Conductivity at 25 °C [µS/cm] 0.055 0.055
Resistance at 25 °C [MΩ x cm] 18.2 18.2
TOC-value* [ppb] < 10 < 5
Dispensing performance [l/min.] up to 2 up to 2
Dispensing preset volumes optional optional
Particles** > 0.2 µm [1/ml] < 1 < 1
Bacteria** [KBE/ml] < 0.01 < 0.01
* The values given are typical and may vary depending on the quality of the feed water ** With sterile filter capsule 0.2 μm

OmniaTap xsbasic 5 OmniaTap xsbasic 5 UV
Tap water according to DIN 2000
Feedwater pressure [bar] 0.5 up to 6 0.5 up to 6
Feedwater temperature [°C] + 2 up to 35 + 2 up to 35
Conductivity at 25 °C [µS/cm] < 2000 < 2000
Colloid index (SDI) < 10 < 10
Dissolved CO2 [ppm] < 30 < 30
Free chlorine [ppm] < 3 < 3
TOC-value [ppb] < 50 < 50
Hardness* [as CaCO3] < 300 < 300
Silica [ppm] < 30 < 30
pH range 4 up to 10 4 up to 10
* For higher values, pre-treatment must be carried out upstream

OmniaTap xsbasic 5 OmniaTap xsbasic 5 UV
Feedwater connection R3/4″ R3/4″
Electrical connection [Volt/Hz] 90-240/50-60 90-240/50-60
Connected load [W] 120 120
Ambient temperature [°C] + 2 up to 35 + 2 up to 35
Dimensions [W x H x D mm] 253 x 530 x 520 253 x 530 x 520
Weight dry [kg] 19 19
The device can be installed either on a bench or on a wall.

Article no. System type* Typical applications
18110051 OmniaTap xs basic 5 AAS, IC, ICP, buffers and media preparation
18110052 OmniaTap xs basic 5 UV Ultra-trace analysis, ICP-MS, HPLC, TOC-analysis
* RO cartridge, ultrapure water cartridge, sterile filter capsule 0.2 μm, sterile overflow and sterile vent filter included

Accessories
19200305 Wall mount Omnia xs
19200500 Volume dosing Omnia xs
19200090 Disinfection cartridge Omnia xs
19200057 Disinfectant Omnia – 3 pcs. / pack
19200091 Disinfection kit Omnia xs complete
19200021 Pre-treatment unit OmniaTap – 10″

Description

The practical all-rounder.
For H2O pure type I + II.

OmniaTap xsbasic is the practical compact system with OneHand dispenser when both pure and ultrapure water is required in small quantities.

The combination of state-of-the-art treatment techniques enables the extraction of pure and ultrapure water from just one system. It can be connected directly to a drinking water pipe. The flexible dispenser is used to extract category I ultrapure water. The removal takes place at the push of a button via the digital control of the dispenser.

An integrated 7 litre tank with recirculation keeps the quality permanently at type II. Downstream terminals can be supplied via an optional pressure output on the pure water tank.