instaBAG BPW

Bs. 0.00Bs. 0.00

Filter bag with dehydrated media

Ideal for pre-enrichment

Ref. 114 090 (BPW 90 mL)
Ref. 114 225 (BPW 225 mL)

instaBAG is a ready-to-use filter bag which includes a dehydrated pre-dosed media, allowing a 2-in-1 process: media preparation and sample preparation for microbiological analyses.

  • Filter bag with dehydrated pre-dosed media
  • Type of dehydrated media: buffered peptone water
  • Filter porosity: < 250 micrometers
  • Compatible with any laboratory blender

Just add water

Ready-to-use bag with pre-dosed dehydrated media in the bag. Just add the sample and sterile and purified water. The diluent dissolves itself during blending.

The dehydrated media is buffered peptone water. instaBAG can therefore be used to dilute any sample to count all microorganisms.

instaBAG is available in BPW 90 mL and 225 mL.

The advantages of a filter bag

Filtration is done during blending. There is no need to wait for sedimentation of the debris to pipet.

The filtrate is particle-free, so there is no debris on the Petri dish. Reading is thus facilitated and the results more accurate.

Applications

instaBAG is used in the food industry and public institute research. It adapts itself to every step of sample preparation. instaBAG is used to perform sample dilutions for enumeration of all microorganisms (ISO 6887). It is also used for non-selective pre-enrichment for the detection of Salmonella spp (ISO 6579) and Enterobacteria (ISO 21528-1).

SPECIFICATIONS

instaBAG BPW 90 instaBAG BPW 225
Reference 114 090 114 225
Ideal For pipetting
Precut for pipetting Y Y
Marking zone Y Y
Voume index Y Y
Type of bag Bag with lateral non-woven filter
Bag composition Multilayer: multicoated reinforced complex
Type of filter Non-woven
Filter porosity < 250 micrometers
Type of dehydrated media Buffered peptone water
Weight of dehydrated media 1.8 g 4.5 g
Sample weight 10 g (± 5 %) 25 g (± 5 %)
Composition for 1 L media Peptone: 10.0 g ; Sodium chloride: 5.0 g ; Anhydous disodium phosphate: 3.6 g ; Monopotassium phosphate: 1.5 g
Volume of water to be added (sterile and purified) 88.2 mL (± 2 %) 220.5 mL (± 2 %)
Blending time 1 minute
Bag dimensions 190 x 300 mm
Gamma ray treated 10 to 25 kGy
Average shelf-life 24 months
In compliance with ISO 11133, ISO 11290-2, ISO 21528, ISO 7218, ISO 6579, ISO 6887 and FDA BAM (Bacteriological Analytical Manual)
Approved for food contact Regulation (EC) N° 1935/2004
Storage conditions Room temperature (+ 6°C à + 30°C). Close the pouch after opening to avoid humidity
Box (w x d x h) 34 x 28 x 11 cm 34 x 28 x 11 cm
Gross weight 1.79 kg 1.7 kg
Aluminium pouch of 10 bags 10 bags
Box of 100 bags 100 bags

Your diluent ready in minutes!

instaBAG is a filter bag which includes a dehydrated pre-dosed media, allowing a 2-in-1 process. Skip the time-consuming media preparation.

instaBAG - Place the sample

1. Place the sample in instaBAG

instaBAG - Add sterile water

2. Add sterile and purified water

instaBAG - Blend

3. Blend the instaBAG with the BagMixer

Description

Filter bag with dehydrated media

Ideal for pre-enrichment

Ref. 114 090 (BPW 90 mL)
Ref. 114 225 (BPW 225 mL)

instaBAG is a ready-to-use filter bag which includes a dehydrated pre-dosed media, allowing a 2-in-1 process: media preparation and sample preparation for microbiological analyses.

  • Filter bag with dehydrated pre-dosed media
  • Type of dehydrated media: buffered peptone water
  • Filter porosity: < 250 micrometers
  • Compatible with any laboratory blender