Autoclave vertical
Bs. 0.00Bs. 0.00
Jpinglobal automatic vertical autoclaves are designed to sterilize liquids, culture media, contaminated media, plastics, solids, glassware, biological waste, among others. The autoclave is controlled by a microprocessor and has an advanced digital display which shows the graph of the sterilization process indicating the programmed temperature, actual temperature, programmed cycle time, exhaust level and safety indications.
The capacity of the vertical autoclaves ranges from 23 to 160 liters, all equipment is delivered factory certified.
Vertical autoclave type.
Four-digit password protection allowing secure access control.
High precision control for perfect sterilization results.
Automatic sterilization system.
Automatic drying system.
Digital instrument panel – digital control panel.
Visual temperature indicator.
Visual pressure gauge, certified pressure gauge.
Working temperature 105°C to 137°C.
Supply voltage 220 VAC/60Hz.
Sterilization programs through electronic control LCD screen.
Pre-cycle programs, liquids, soft instruments, textile – instruments and an advanced free program which allows the operator to vary all the equipment parameters.
Sterilization data recording through electronic control.
Independent temperature and pressure monitoring.
Chamber in 304L stainless steel certified for long life and high resistance to corrosion. The equipment is designed for easy maintenance and cleaning.
Liquid cycles are done using an electronic ramp to perform perfect cycles.
6 adjustable discharge levels for liquids.
Process security through level control. According to capacity.
Temperature uniformity in the chamber for sterilization of all contents.
At the end of the cycle, the water is evacuated from the chamber to avoid contamination.
Overpressure safety system.
Over temperature security system.
Automatic shutdown after finishing the sterilization cycle.
Security system in the resistances.
Thermostat for protection against overheating.
Safety valves for over pressure and over temperature.
Electronic and mechanical monitoring.
Safety front cover to avoid burns.
If the device is not used for more than four hours, it will automatically turn off.
USB output for equipment update and maintenance.
Certification of spare parts available for 7 years
All autoclaves are certified from the factory.
All equipment is delivered with the respective induction.
All equipment is delivered with a manual in Spanish or English.
Models and references
Referencia |
Tipo |
Dimensiones internas (mm) |
Capacidad |
Voltaje |
---|---|---|---|---|
JPA23LV |
Autoclave vertical automática |
Diámetro 250 x profundidad 400 |
23 litros |
220V |
JPA40LV |
Autoclave vertical automática |
Diámetro 310 x profundidad 500 |
40 litros |
220V |
JPA55LV |
Autoclave vertical automática |
Diámetro 310 x profundidad 700 |
55 litros |
220V |
JPA62LV |
Autoclave vertical automática |
Diámetro 380 x profundidad 490 |
62 litros |
220V |
JPA85LV |
Autoclave vertical automática |
Diámetro 380 x profundidad 690 |
85 litros |
220V |
JPA110LV |
Autoclave vertical automática |
Diámetro 500 x profundidad 500 |
110 litros |
220V |
JPA160LV |
Autoclave vertical automática |
Diámetro 500 x profundidad 750 |
160 litros |
220V |
Additional accessories
Vacuum system to remove air.
Built-in steam generator.
Integrated printer.
Software.
Baskets.
Automatic door.
Special support for vertical AUTOCLAVE (JPInglobal brand bioreactor).
Chamber made of 316 stainless steel.