Hydrobromic acid ROTIPURAN®Ultra 20 %

Bs. 779.40Bs. 2,418.75

Empirical formula HBr
Molar mass (M) 80,91 g/mol
Density (D) 1,49 g/cm³
Boiling point (bp) ~100 °C
ADR 8 III
WGK 1
CAS No. 10035-10-6
EG-Nr. 233-113-0
UN-Nr. 1788

Extra highpure acid (ppt quality) for sample preparation in ultra trace analysis. The quality for highest demands on purity.

N/A
Assay (w/w) 44-49 %
Aluminium (Al) ≤100 ppt
Barium (Ba) ≤100 ppt
Beryllium (Be) ≤100 ppt
Lead (Pb) ≤1 ppt
Cadmium (Cd) ≤100 ppt
Cesium (Cs) ≤10 ppt
Calcium (Ca) ≤100 ppt
Cerium (Ce) ≤10 ppt
Chromium (Cr) ≤100 ppt
Dysprosium (Dy) ≤10 ppt
Iron (Fe) ≤100 ppt
Erbium (Er) ≤10 ppt
Europium (Eu) ≤10 ppt
Gadolinium (Gd) ≤10 ppt
Gallium (Ga) ≤100 ppt
Gold (Au) ≤100 ppt
Hafnium (Hf) ≤10 ppt
Holmium (Ho) ≤10 ppt
Indium (In) ≤10 ppt
Potassium (K) ≤100 ppt
Cobalt (Co) ≤100 ppt
Copper (Cu) ≤100 ppt
Lanthanum (La) ≤10 ppt
Lithium (Li) ≤100 ppt
Lutetium (Lu) ≤10 ppt
Magnesium (Mg) ≤100 ppt
Manganese (Mn) ≤100 ppt
Molybdenum (Mo) ≤100 ppt
Sodium (Na) ≤100 ppt
Neodymium (Nd) ≤10 ppt
Nickel (Ni) ≤100 ppt
Niobium (Nb) ≤10 ppt
Palladium (Pd) ≤100 ppt
Platinum (Pt) ≤100 ppt
Praseodymium (Pr) ≤10 ppt
Rhenium (Re) ≤100 ppt
Rhodium (Rh) ≤100 ppt
Rubidium (Rb) ≤100 ppt
Ruthenium (Ru) ≤100 ppt
Samarium (Sm) ≤10 ppt
Scandium (Sc) ≤100 ppt
Silver (Ag) ≤100 ppt
Strontium (Sr) ≤100 ppt
Tellur (Te) ≤10 ppt
Terbium (Tb) ≤10 ppt
Thallium (Tl) ≤10 ppt
Thorium (Th) ≤1 ppt
Thulium (Tm) ≤10 ppt
Titanium (Ti) ≤100 ppt
Uranium (U) ≤1 ppt
Vanadium (V) ≤100 ppt
Bismuth (Bi) ≤100 ppt
Tungsten (W) ≤100 ppt
Ytterbium (Yb) ≤10 ppt
Yttrium (Y) ≤10 ppt
Zinc (Zn) ≤100 ppt
Tin (Sn) ≤100 ppt
Zirconium (Zr) ≤10 ppt

Hydrobromic acid ROTIPURAN®Ultra 48 %
Thread 38-430

Damage and burn | Hydrobromic acid ROTIPURAN®Ultra 20 % Examples of effect: Damage metals and burn body tissues; may cause serious eye damage. Safety: Avoid contact; wear safety spectacles and gloves. In the event of contact with eyes and skin, rinse with water.
Damage to heath 1 | Hydrobromic acid ROTIPURAN®Ultra 20 % Examples of effect: Lead to damage to heath, cause irritation to eyes, skin or respiratory organs. Are fatal in larger quantities. Safety: As previously stated, in the event of skin irritation or contact with eyes, rinse with water or a suitable medium.
H290-H314-H335 May be corrosive to metals, causes severe skin burns and eye damage, may cause respiratory irritation.
P280 P302+P352 P305+P351+P338 P310 Wear protective gloves/eye protection, IF ON SKIN: Wash with plenty of water, IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing, immediately call a POISON CENTER/doctor.

Description

Hydrobromic acid ROTIPURAN® Ultra/Supra

Acids, Alkaline Solutions and Water for trace analysis via ICP-OES, ICP-MS, AAS and IC

Carl ROTH provides two high quality product lines, ROTIPURAN® Ultra & Supra specially for research, trace analysis and electronics. These ultrapure reagents are produced using a technologically complex distillation process (subboiling distillation) and are filled only into specially selected, suitable containers under clean room conditions. Very extensive production and quality controls guarantee extremely high quality.

ROTIPURAN® Ultra

This ultrapure product line is characterised for its especially high purity (ppt-quality) and fulfils the highest purity requirements. The metal content of these products is below 100 ppt [parts per trillion=10-12] while key metals are under 10 ppt. These products are used in ultra trace analysis (via ICP-OES, ICP-MS, AAS, IC) and for applications in the electronics industry. The reagents are bottled and offered in high class fluoropolymer plastic bottles (PFA and FEP). The certificates of analysis are available online.

Additional information

Pack

Volumen

, , ,