Titrator TitroLine® 7800 basic unit with magnetic stirrer and software TitriSoft 3.5 – SI Analytics
Bs. 0.00Bs. 0.00
Automatic Titrator for exchangeable heads for potentiometry including PC Titration software 3.5.
The titration software TitriSoft 3.5 is the optimum solution for your titration tasks. The software can be used with Windows 7, 8.1 and 10 and supports your daily work procedures during sample preparation, titration and evaluation of the results. The software has been developed to be clear, logical and user-friendly.
Connection possibilities
Using TitriSoft 3.5 you can control the following devices from a PC:
In combination with the new TitriSoft 3.5 / 3.5 P, a so-called “parallel” titration can be carried out with a TitroLine® 7800 and a TITRONIC®300 / 500 piston burette.
This means you only need one titrator and one piston burette to carry out two titrations simultaneously, in parallel. An example would be a titration with a pH electrode and with the OptiLine 6 photometric sensor.
Scope of delivery:
Software on USB-stick, RS232-connection cable TZ 3097, USB-RS-converter TZ 3080 and USB cable.
TitroLine® 7800 basic unit with magnetic stirrer, without exchangeable head, with keyboard, hand controller, stand rod and titration clamp Z 305, power supply 100-240 V
| Measuring input 1 (analog) | pH/mV-input with 24 bit transducer. Electrode socket according to DIN 19 262 or BNC with RFID receiver for SI Analytics ID electrodes |
| Measuring range pH/accuracy | – 3.0… 18.00 / 0.002 +/- 1 digit |
| Measuring range mV/accuracy | – 2000…2000/ 0.1 +/- 1 digit |
| Measuring input µA: | μA-connector for double platinum electrodes, connection: 2 x 4 mm – sockets), polarisation voltage variably adjustable |
| Measuring input temperature: | Connector for Pt 1000 / NTC 30 KOhm ( connection: 2 x 4 mm – sockets) |
| Measuring range temperature | Pt 1000 – 75…195 °C / NTC 30 KOhm – 40 …125 °C |
| Measuring input: (digital), IDS | Digital input for teh connection of IDS®-sensors (pH, mV, conductivity)/ accuracy depends on teh connected sensor |
| pH | 0.000…14.000+/- 0.004 |
| mV | +/- 1200 +/- 0.2 |
| Temperature °C | – 5.0…105 +/- 0.2 |
| Conductivity | 0.00…2000 mS/cm +/- 0,5% from measurement value |
| Interfaces: | 3 × USB (2 x USB-A and 1 × USB-B), 2 × RS-232-C and 1 x LAN |
| Interchangeable burettes | 5, 10, 20 ml or 50 ml intelligent interchangeable burette head |
| Resolution (Steps): | 20.000 steps |
| Dosing accuracy: | according to DIN ISO 8655, part 3: accuracy: < 0.15 % precision: < 0.05 - 0.07 % (in dependence of the used burette size) |
| Display | 3.5 inches – 1/4 VGA TFT graphic color display with 320 x 240 pixels |
| Housing material | Polypropylene |
| Dimensions | 15.3 x 45 x 29.6 cm (W x H x D), height with interchangeable head |
| Front keyboard | Polyester coated |
| Material interchangeable burettes | Valve: PTFE/ETFE; Cylinder: borosilikate glass 3.3 (DURAN®) hoses (FEP, blue) |
| Weight | 2.3 kg for basic device, 3.5 kg für complete device with interchangeable head (with empty reagent bottle) |
| Ambient conditions | Ambient temperature: + 10 … + 40 °C for operation and storage Humidity according to EN 61 010, Part 1: max. relative humidity 80 % for temperatures up to 31 °C, linear decrease down to 50 % relative humidity at a temperature of 40 °C |
| Power supply: | 100-240 V; 50/60 Hz, power input: 30 VA |
| CE-sign: | EMC compatibility according to the Council Directive: 2004/108/EG; applied harmonized standards: EN 61326-1:2006 Low-voltage directive according to the Council Directive 2006/95/EG Testing basis EN 61 010, Part 1 |
Description
Automatic Titrator for exchangeable heads for potentiometry including PC Titration software 3.5.
The titration software TitriSoft 3.5 is the optimum solution for your titration tasks. The software can be used with Windows 7, 8.1 and 10 and supports your daily work procedures during sample preparation, titration and evaluation of the results. The software has been developed to be clear, logical and user-friendly.
Connection possibilities
Using TitriSoft 3.5 you can control the following devices from a PC:
In combination with the new TitriSoft 3.5 / 3.5 P, a so-called “parallel” titration can be carried out with a TitroLine® 7800 and a TITRONIC®300 / 500 piston burette.
This means you only need one titrator and one piston burette to carry out two titrations simultaneously, in parallel. An example would be a titration with a pH electrode and with the OptiLine 6 photometric sensor.
Scope of delivery:
Software on USB-stick, RS232-connection cable TZ 3097, USB-RS-converter TZ 3080 and USB cable.
TitroLine® 7800 basic unit with magnetic stirrer, without exchangeable head, with keyboard, hand controller, stand rod and titration clamp Z 305, power supply 100-240 V
