Acetic acid ROTIPURAN®Supra 100 %

Bs. 106.45Bs. 319.85

Glacial acetic acid, Methanecarboxylic acid, Ethanoic acid
Empirical formula C2H4O2
Molar mass (M) 60,05 g/mol
Density (D) 1,05 g/cm³
Boiling point (bp) 117,9 °C
Flash point (flp) 39 °C
Melting point (mp) 16,64 °C
CAS No. 64-19-7
EG-Nr. 200-580-7
UN-Nr. 2789

Highpure acid (ppb quality) for sample preparation in trace analysis (e.g. using ICP, AAS, Ion chromatography etc.).

Assay (w/w) ≥99 %
Colour (APHA) ≤10
Chloride (Cl) ≤0.0001 %
Phosphate (PO4) ≤0.0001 %
Sulphate (SO4) ≤0.00005 %
Aluminium (Al) ≤1 ppb
Antimony (Sb) ≤0.5 ppb
Arsenic (As) ≤0.5 ppb
Barium (Ba) ≤0.5 ppb
Beryllium (Be) ≤0.1 ppb
Lead (Pb) ≤0.1 ppb
Cadmium (Cd) ≤0.5 ppb
Cesium (Cs) ≤0.1 ppb
Calcium (Ca) ≤1 ppb
Cerium (Ce) ≤0.1 ppb
Chromium (Cr) ≤1 ppb
Dysprosium (Dy) ≤0.1 ppb
Iron (Fe) ≤1 ppb
Erbium (Er) ≤0.1 ppb
Europium (Eu) ≤0.1 ppb
Gadolinium (Gd) ≤0.1 ppb
Gallium (Ga) ≤0.1 ppb
Germanium (Ge) ≤0.5 ppb
Hafnium (Hf) ≤0.1 ppb
Holmium (Ho) ≤0.1 ppb
Indium (In) ≤0.1 ppb
Potassium (K) ≤1 ppb
Cobalt (Co) ≤0.1 ppb
Copper (Cu) ≤0.5 ppb
Lanthanum (La) ≤0.1 ppb
Lithium (Li) ≤0.1 ppb
Lutetium (Lu) ≤0.1 ppb
Magnesium (Mg) ≤0.5 ppb
Manganese (Mn) ≤0.5 ppb
Molybdenum (Mo) ≤0.5 ppb
Sodium (Na) ≤1 ppb
Neodymium (Nd) ≤0.1 ppb
Nickel (Ni) ≤0.5 ppb
Platinum (Pt) ≤0.5 ppb
Praseodymium (Pr) ≤0.1 ppb
Mercury (Hg) ≤1 ppb
Rhenium (Re) ≤0.1 ppb
Rhodium (Rh) ≤0.5 ppb
Rubidium (Rb) ≤0.1 ppb
Ruthenium (Ru) ≤0.5 ppb
Samarium (Sm) ≤0.1 ppb
Scandium (Sc) ≤0.1 ppb
Selenium (Se) ≤1 ppb
Silver (Ag) ≤1 ppb
Strontium (Sr) ≤0.5 ppb
Tellur (Te) ≤0.5 ppb
Terbium (Tb) ≤0.1 ppb
Thallium (Tl) ≤0.1 ppb
Thorium (Th) ≤0.1 ppb
Thulium (Tm) ≤0.1 ppb
Titanium (Ti) ≤0.5 ppb
Uranium (U) ≤0.1 ppb
Vanadium (V) ≤0.5 ppb
Bismuth (Bi) ≤0.1 ppb
Tungsten (W) ≤0.5 ppb
Ytterbium (Yb) ≤0.1 ppb
Yttrium (Y) ≤0.1 ppb
Zinc (Zn) ≤1 ppb
Tin (Sn) ≤0.5 ppb
Zirconium (Zr) ≤0.1 ppb
KMnO4 reducing substances complies
K2Cr2O7 reducing substances complies

Acetic acid ROTIPURAN®Supra 100 %

Thread GL 45

Icon EVE EUD | Acetic acid ROTIPURAN®Supra 100 % Please consider that this product might be liable to some legal sanctions as for example to obtain an end user declaration or the prohibition of some applications. For details please do contact your counterpart in our sales department!
Flammable | Acetic acid ROTIPURAN®Supra 100 % Examples of effect: Flammable; liquids form compounds with the air which can become explosive; produce flammable gases with water or can self-combust. Safety: Keep away from open flames and sources of heat; close containers tightly; store in a fire-safe manner.
Damage and burn | Acetic acid ROTIPURAN®Supra 100 % Examples of effect: Damage metals and burn body tissues; may cause serious eye damage. Safety: Avoid contact; wear safety spectacles and gloves. In the event of contact with eyes and skin, rinse with water.
H226-H314 Flammable liquid and vapour, causes severe skin burns and eye damage.
P210 P280 P301+P330+P331 P303+P361+P353 P305+P351+P338 P310 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking, wear protective gloves/protective clothing/eye protection/face protection, IF SWALLOWED: rinse mouth. Do NOT induce vomiting, IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water [or shower], IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present, and easy to do. Continue rinsing, immediately call a POISON CENTER/doctor.


Acetic acid ROTIPURAN® Ultra/Supra

Acids, Alkaline Solutions and Water for trace analysis via ICP-OES, ICP-MS, AAS and IC

Carl ROTH provides two high quality product lines, ROTIPURAN® Ultra & Supra specially for research, trace analysis and electronics. These ultrapure reagents are produced using a technologically complex distillation process (subboiling distillation) and are filled only into specially selected, suitable containers under clean room conditions. Very extensive production and quality controls guarantee extremely high quality.


This supra quality line (ppb-quality) is perfectly suitable for sample preparation in trace analysis (e.g. via ICP-OES, AAS, IC, etc.). Over 60 elements are specified and their content is below 1 ppb [parts per billion =10-9]. Bottled and delivered in special plastic bottles. The certificates of analysis are available online.

Additional information



, , ,